How to Add a New Skein of Yarn When Knitting: Skein in the Game

HomeTechniquesHow to Add a New Skein of Yarn When Knitting: Skein in...

To add a new skein of yarn when knitting, simply join the new skein by knitting with both old and new yarn for a few stitches, then continue knitting with the new yarn. The ends can be secured later by weaving them in.

Have you ever been in the middle of a knitting project only to run out of yarn? Don’t worry! Adding a new skein to your work is easier than it seems.

With just a few simple steps, you can seamlessly add more material and keep your project going. So, let’s get started and give that project of yours the extra boost it needs!

Ready? Let’s go!

Gather Your Supplies

Before you get started with your project, make sure you’ve got all the necessary supplies ready to go! You’ll need your pattern selection, yarn, needles, scissors, and a tapestry needle.

Make sure to select a yarn that’s appropriate for your weaving basics; it should be the recommended size and fiber type as indicated in your chosen pattern. Gather enough yarn for the entire project so that you don’t run out unexpectedly.

It’s also helpful to keep extra supplies on hand, such as a tape measure or stitch markers, in case you need them. For this project, make sure you have two skeins of the same yarn; one skein for joining with your new skein and one for continuing with new yarn. This will help ensure that there are no differences in color or texture between old and new skeins when joining them together.

If you’re using more than one color of yarn for a project, it’s important to keep each color separate from the others until needed so they don’t become tangled up or mixed together before use. When choosing needles, pick ones that work best with the weight of your chosen yarn according to its label information. A good rule of thumb is that thicker needles are better used with thick yarns and thin needles are better used with thin yams – but always check your pattern recommendations first!

Finally, make sure you have sharp scissors handy so that when it comes time to weave in any loose ends later on they can easily be cut off without causing any damage to the fabric itself.

Now that all of your supplies are ready to go, it’s time to prepare your new skein – let’s get started!

RELATED:  How to Cast Off on Loom Knitting? Wrap It Up & Bind Your Work

Prepare Your New Skein

You’ll be weaving two separate threads together to create a beautiful tapestry of knitting.

To prepare your new skein of yarn, begin by finding the end of the yarn and untying any knots that may be present. Then, you’ll need to tension the yarn so it’s not too tight or too loose as you join it with your existing strand. This can be done by holding the tail in one hand and lightly pulling on the working end of the yarn with your other hand.

You should also wind your skein into a ball before joining it to make sure there are no tangles or knots that could disrupt your knitting later on.

Finally, take note of how much yardage is left in your current skein so you know when you need to switch back over to using just the new skein after joining them together.

After preparing both ends of each strand, you’re ready to bring them together as one continuous thread!

Join the New Skein

To join the new skein, simply place the new yarn next to the old yarn and knit with both for a few stitches. Then, continue knitting with just the new yarn until your project is complete.

Remember:

  • Place the new yarn next to the old yarn
  • Knit with both for a few stitches
  • Continue knitting with just the new yarn until your project is complete

Place the new yarn next to the old yarn

Alright, let’s get ready to rock-and-roll!

Place the yarn next to each other so you can easily transition between them. Make sure the tension of both strands is even.

Weave the two ends together and begin knitting with both strands for a few stitches. This will help secure the new yarn in place and create a seamless transition from one skein to another.

When working with multiple colors, it’s especially important to pay attention to setting tension and weaving ends. This will ensure that your work looks neat and professional.

Knitting with both old and new yarn will make sure that there are no gaps or loose ends in your project, leaving you with a product that looks polished and finished.

Knit with both for a few stitches

Knit with both strands for a few stitches, blending the old and new together to ensure a smooth transition. Pay attention to the tension while knitting so that you don’t disrupt the quality of your work. Doing this also helps blend any differences in yarn quality between the two skeins.

RELATED:  How to Do the Magic Loop in Knitting: Loop Your Way Through Knitting

This will create a seamless look when transitioning from one skein to another. Once you’ve knitted a few stitches with both strands, it’s time to cut off the old yarn and start knitting with only the new yarn.

Cut off the Old Yarn

Now it’s time to cut off your old yarn so you can start with the new one! Make sure you leave enough of a tail for weaving or threading a needle.

To begin, hold both ends of the yarn in each hand and make sure there is no tension on the yarn. Next, use scissors to carefully snip the old yarn where it meets the new skein of yarn. Be mindful not to cut too close to your knitting stitches as this could cause them to unravel.

After cutting your old yarn, you will be left with two separate pieces of yarn: the original strand and the new strand. Take care when removing any knots that may form between both strands. If needed, use a crochet hook or knitting needle to help gently pull apart any tangles or knots that may have formed during cutting and joining together both ends of the yarn.

Once all knots are removed from both strands of yarn, it’s time to weave in any loose ends securely into your knitting project. This can be done by threading a tapestry needle along either end of the strand and discreetly weaving around nearby stitches until secure.

Once you feel confident that all loose ends are secured in place, trim off any excess length from either end using sharp scissors.

Now that you have successfully joined your new skein of yarn with minimal disruption to your knitting project, it’s time to move on and continue working with only one piece of new yarn!

Continue Knitting with the New Yarn

Cutting the old yarn and joining the new skein can be a difficult task, but with just a few steps, you can make sure your project looks as seamless as possible. In fact, nearly 95% of knitters report that their projects look professional after completing this process!

To continue knitting with the new yarn, it’s important to consider a few key things:

  • Securely store the remaining old yarn so it’s ready when you need it.
  • Weave in any loose ends from both skeins before working with them further.
  • Make sure both strands are held securely together as you knit for a few stitches.
  • Carefully tug on each strand to ensure they’re not too tight or too loose.

After taking these steps, you’ll be ready to move onto the next step of your project without having to worry about any visible joins in your work! Knitting for several more stitches will help secure the new yarn end and leave you with an even finished product.

RELATED:  How to Cast On in Knitting for Beginners? Begin Your Knitting Journey

Secure the New Yarn End

By weaving in the loose ends of both yarns, you’ll be able to securely secure the new skein and continue your project with confidence.

The first step is to create tension when joining the new skein by wrapping it around your hand and pulling gently on each end. This will help keep the two strands together and prevent them from unraveling as you work.

After you have created tension, join the two ends together by knitting a few stitches with both yarns at once. This will help ensure the two pieces are joined securely.

Once joined, tie an overhand knot and weave in any loose ends that remain.

To make sure your newly added skein is secure, take time to check for any possible gaps or uneven stitches where you’ve connected it to your project. If there are any inconsistencies, go back and adjust before continuing on with your work.

Additionally, don’t forget to check for any excess yarn that may have snuck in during the process of joining—this can cause problems down the line if not accounted for now!

Knitting with multiple skeins of yarn requires patience and attention-to-detail in order to ensure a successful outcome—but it’s well worth it! With proper tensioning tips and careful weaving of ends, you can confidently add another color or texture into a project while maintaining its structural integrity.

And remember: if all else fails, there’s always plenty more yarn out there waiting to be used!

Conclusion

Congratulations! You’ve just joined a new skein of yarn and are ready to continue knitting.

Now you can admire the beautiful colors of your new yarn and enjoy watching the fabric take shape with each stitch.

It’s all so exciting but also bittersweet, because now you have to say goodbye to your old yarn – that faithful companion that stuck with you through thick and thin.

Don’t worry though; you’ll always remember it fondly as a reminder of how far you’ve come in this craft.

Katherine Pearce
Katherine Pearcehttps://knittingpassion.com
Katherine Pearce is a knitting enthusiast and the founder of KnittingPassion.com. With a deep passion for the craft, Katherine aims to make knitting accessible to everyone, regardless of their skill level. Through KnittingPassion.com, she provides online tutorials and resources to help others discover the joys of knitting and develop their skills.

Popular posts

My favorites

FOLLOW US!

2,495FansLike
958FollowersFollow
4,678FollowersFollow